• Euge
  • New member
  • Offline
  • Registered: 2011-03-30
  • Posts: 4

Topic: Tap Tempo doesn't work!

Hi everyone!

I'm having problems with the Tap Tempo function of my G-Major 2!

I recently bought a momentary switch (Roland DP-2) for setting the delay tempo in my patches: I've followed all the instructions on some threads to set up that function.
I connected my pedal in the back of the unit, set up the Tap tempo on Global  and Mod menus.
Actually when I press the pedal the unit receives the signal and the two blinking leds that show the tempo in the Matrix view follow the tempo I set! ...everything perfect, but actually the tempo of the patch doesn't change!

I have found nothing 'bout this problem on the web! HELP ME!


(sorry for my poor english! I'm Italian!)
BYE!

  • Euge
  • New member
  • Offline
  • Registered: 2011-03-30
  • Posts: 4

Re: Tap Tempo doesn't work!

No one can help me??

  • brent
  • New member
  • Offline
  • Registered: 2010-10-13
  • Posts: 6

Re: Tap Tempo doesn't work!

Do you have a midi pedal connected also using midi clock?  What is MOD master set to?

  • Registered: 2011-06-09
  • Posts: 8

Re: Tap Tempo doesn't work!

In Global menu, you must choose wich kind of pedal you're using in the GM2 beetween expression/vol, momentary, etc..

  • Registered: 2010-04-15
  • Posts: 12

Re: Tap Tempo doesn't work!

Under the global menu you go to the Tap Master selection and choose preset or global,preset will save the the tempo for that patch only,global will do it to all your presets.

  • Euge
  • New member
  • Offline
  • Registered: 2011-03-30
  • Posts: 4

Re: Tap Tempo doesn't work!

@brent: I do not have a MIDI pedal, I just have a momentary pedal (Roland DP-2)! I can't remember how the MOD master is set to, 'cause my GM2 is in my reheasal room!

@ystejam: I set 'momentary' in the Global menu.

@blksolo: I'll try this solution.

But actually when I press the pedal, the display receives the tempo I set. Unfortunately the delay tempo doesn't seem to change... :-(

  • Registered: 2009-06-15
  • Posts: 348

Re: Tap Tempo doesn't work!

Euge wrote:

@brent: I do not have a MIDI pedal, I just have a momentary pedal (Roland DP-2)! I can't remember how the MOD master is set to, 'cause my GM2 is in my reheasal room!

@ystejam: I set 'momentary' in the Global menu.

@blksolo: I'll try this solution.

But actually when I press the pedal, the display receives the tempo I set. Unfortunately the delay tempo doesn't seem to change... :-(

Hi Euge,

Please make sure a tempo value is set for the delay, so the unit knows how to quantise your
tapped  tempo values.

  • Euge
  • New member
  • Offline
  • Registered: 2011-03-30
  • Posts: 4

Re: Tap Tempo doesn't work!

Hi Mike!

How can I set the tempo value for the delay? I know....I'm a n00b! ;-)

  • Registered: 2010-02-24
  • Posts: 14

Re: Tap Tempo doesn't work!

Euge wrote:

Hi Mike!
Hey mike ive been wanting to give this tempo thing a shot. i use the preset mode on my GCP.And i was wondering if i could use an outside tap tempo switch to control the tempo for various presets and also use the determend tempo setting on a setting at the same time? And what switch woulod you recomend? THANX
How can I set the tempo value for the delay? I know....I'm a n00b! ;-)