• Registered: 2010-08-15
  • Posts: 1

Topic: Help about Load/Store Presets

I try to store a preset but i can't, as in the User's Manual, I enter the preset On and numbers blinking and i set a tone and load it thats ok but i'll up another preset and load a different effect , then turn my previous load but it's gone and its blinking again.

so how can i store a preset in g-sharp ? for ex. i want to set "01" as low reverb and "02" as high reverb tones...

p.s. : i haven't got a g-switch or midi controller yet...i chose tone numbers from the control panel on the g-switch...

  • Registered: 2011-05-06
  • Posts: 3

Re: Help about Load/Store Presets

Do a reset and try again.  Power off the unit by unplugging the power cord then hold down the tap tempo button while you plug the unit back in.  A "r" will appear.  Then power off and on as you normally would and your unit is reset.  You can change function of g switch per the manual.